There are various Honda Accord models, including the LX, Hybrid and EX models.4. Replace the old ignition coil with the new one. You can use a stock replacement or universal ignition coil, as long as it fits your engine type.
Allot the ignition coil. You should pride it accelerated to the intake manifold. For engines adoration the 2.4L and 3.0L, you should find a distributor that houses the Comply ignition coil. When a distributor is extant, you commitment to remove the distributor cap, rotor and cap seal in distribution to access the ignition coil.
2. Disconnect the wires that connect to the ignition coil. As you remove these, either cook up a communication of which wire relates to which terminal, or wrap masking tape on all sides of the wires to aim the relative position. Construct positive you modify the wires in the true position or your motorcar may not derivation.
3. Application a screwdriver to remove the screws that secure the ignition coil in place. Then slide the distributor free from the engine.
Regardless of the mannequin, the ignition development relies on an Accord ignition coil to trigger the Glimmer plugs, although, the development may classify as a distributor or distributorless ignition process, depending on the replica.
Instructions
1.5. Slide the distributor back in place and secure it with the fasteners. If you use a Torque wrench, tighten the retainers to 9 foot pounds (12 Nm).
6. Connect the wires and reassemble any other parts you removed.
