Change a Mazda 6 Operate Cestuses
Inspection and replacement of the serpentine coerce girth on your Mazda 6 Testament garner the belt from failing and leaving you stranded. The serpentine cummerbund should be checked during your public maintainance intervals and replaced whether it is long, worn, cracked or has been slipping and forming clatter. The serpentine region drives the alternator, drench pump, air conditioning compressor and the faculty steering pump, so failure of the cestuses Testament basis the van to overheat, and electrical and steering systems Testament fail to operate.
Instructions
Turn the belt tensioner clockwise with your socket and ratchet then slide the new serpentine belt over it.4. Release the tension on the belt tensioner and allow it to remove the slack from the new belt.
Slide the drive belt off of the tensioner and accessory pulleys then slowly release the tensioner. Do not let it snap back as damage may occur to the spring and mechanism if this happens.
3. Remove the old belt from the engine compartment and install a new belt onto the accessory pulleys.1. Allot the serpentine belt tensioner on the front of the engine. Berth a socket and ratchet on the bolt in the center of the belt tensioner and turn it clockwise to release the tension on the belt.2.
You do not need to adjust it any more than this. The tensioner is designed to keep the precise amount of tension on the serpentine belt for your Mazda.
