Your Mazda 6 has an electric cooling fan and one of two engine sizes. These steps directions the 2.3L (L3) engine and can be accomplished by a trainee with a wrench in approximately an interval. The 3.0L (Aj) engine requires a slightly besides complicated procedure to convert the engine fan.
Instructions
1. Disconnect the adverse battery cable on your Mazda 6, then unbolt and remove the fan shroud (housing) panel.
2. Remove the cooler main stay and, provided your vehicle has an automatic transmission, disconnect the oil hose stay extremely. Then unplug the fan Engine's electric connector from the wiring harness and disconnect the wiring harness from the fan shroud. Disconnect the coolant reservoir hose from the radiator.
3. Loosen and remove the pile bolts in line to lift the fan meeting gone of the engine compartment and transform the fan Engine and blades whether de rigueur. Connect the coolant reservoir hose to the radiator and plug the electric fan back into its connector. Reattach the wiring harness to the fan shroud if it was originally connected.6. Replace the oil hose stay if you have an automatic transmission, and replace the cooler pipe stay and shroud panel.
You may besides change the filled unit.4. District the recent fan meeting, or the old fan assembly with new parts, back into the engine compartment and bolt it into place.5.
7. Reconnect the negative battery cable; check for coolant leaks and proper fan operation.
