Your Pontiac Grand Prix has an electrically operated engine cooling fan. The procedure to moderate the engine fan in a Pontiac Grand Prix is relatively mild compared to conducting the twin procedure on many other vehicles, and can be accomplished by a novice, using fair-minded a wrench, in approximately an interval.
Instructions
1. Disconnect and isolate the denial battery cable on your Pontiac Grand Prix to accumulate the electrically operated engine fan from switching on unexpectedly.
6. Reconnect the negative battery cable. Start your vehicle's engine, let it run up to normal operating temperature and check for proper fan operation. Also, check for coolant leaks.
Unplug the cooling fan electrical wiring harness, then unbolt and remove the plentiful fan meeting from the radiator benefit.
4. Distance the au courant fan meeting in the engine compartment and install it to the radiator abutment. Tighten the mounting bolts to 7 foot pounds (9.5 Nm) of torque. Plug the engine cooling fan's electrical connector back in.
5. Interchange the engine strut in its Correct position, secure the retaining bolt and tighten the other mounting bolts. Modify the coolant recovery reservoir and/or the air cleaner meeting, whether you removed them in Step 2.
2. Remove the engine strut brace bolts from the upper tie bar and loosen the other bolts before rotating the strut and brace rearward. You may extremity to remove the coolant recovery reservoir and/or the air cleaner meeting to conceive aggrandized working amplitude.3.
