Modify a 1996 Ford Explorer Oxygen Sensor
Discard the old sensor.3. Install the new sensor and thread it by hand. Torque the sensor to 30 pound-feet with a torque wrench.
Instructions
1. Hoist your Explorer with a jack and position a allot of jack stands beneath it for support. Remove the jack once the jack stands are stable.
2. Disconnect the electrical connection from the oxygen sensor. Remove the oxygen sensor using an oxygen sensor socket and ratchet.Provided the Gauze milage in your 1996 Ford Explorer has noticeably decreased or the engine is running Rugged, you may carry a failing O2 sensor. The 1996 Explorer uses four O2 sensors in the emissions method. The sensors are located to the front and rear of the dual converters and mount straight into the exhaust pipes. You can easily exchange the O2 sensors on your Motor lorry Homewards with a meagre customary help tools.
Press the wiring connection into place until it clicks.
4. Repeat the process on the remaining sensors if needed. Raise the truck slightly with the jack and remove the jack stands. Lower the truck to the ground and remove the jack.
