The Chevrolet emergency cable is the cable that runs from the emergency brake to the backside of the Motor lorry.4. Pull the Motor lorry's Floor-mat back with your hands. Whether you cannot determine it with your hands, use a pry bar.
Instructions
1. Plain the Silverado's hood. Place the battery wire labelled "-" for refusal. With an adjustable wrench, unscrew the bolt tightened on the battery to disconnect the annulling wire.
2. Step underneath the Motor lorry. Unbolt the screw the equalizer aficionado located on the parking brake cables. Remove the cables with your hands.
3. Unbolt the parking brake's pedal meeting and remove the emergency cable. Stand up and extensive the Silverado's front door.
Whether the cable is broken, you cannot custom the Silverado's emergency brake. You can transform the emergency brake by buying a replacement cable at an authorized Chevrolet dealer. No best tools are required to remove the doddering cable and alternate it with a advanced one, as an adjustable wrench Testament close the trick. Find the emergency cable and pull it out with your hands.
5. Place the new cable into the area in the truck's floor where the previous one was. Run it through the floor.
6. Move underneath the truck. Slide the cable through the pedal assembly. Slide it back into the area where the previous one was and tighten the equalizer nut.
7. Reconnect the negative battery wire.
