Alternate the rear CD brakes before they've worn extremely far.
The rear CD brakes are basically the corresponding on all automobiles, with the meaningful departure career the objective of the brake caliper. Each's driving habits are colorful, so there is no particular space dictating when the brakes should be changed. Most pads retain wear indicators--a plenty of steel that is plant fix to secrete a high-pitched squeal when the pads keep worn far Sufficiently to wish changing. You should peep the brakes periodically and copper them before they are worn Sufficiently that they embarkation to damage the rotors (discs).
Instructions
1. Stadium the vehicle on a consistent surface and settle the turn chocks in front of the front wheels.
Return the caliper piston to the full "in" position. This will vary depending on the model of the vehicle and may be done with a C-clamp by twisting the screw of the clamp in until the piston is seated. On some vehicles you will need a specific tool to twist the piston back into place.
Remove the wheel.
4. Remove the caliper by taking out the caliper guide pins using the proper socket and ratchet. The pins are located on the back side of the caliper.
5. Remove the brake pads by unclipping them from the caliper.
6.2. Jack the vehicle up using the machine jack and apartment a jack stand under the frame near the jacking mark. Raise the jack stand as close to the frame as possible.3.
7. Clip the new brake pads into place on the caliper.
8. Reinstall the caliper and tighten the caliper guide pins using the proper socket and ratchet.
9. Replace the wheel and remove the jack stand.
10. Lower the vehicle back to the ground, tighten the lug nuts on the wheel and repeat the process for the other rear wheel.
