Changing the Gauze container on your motorcycle is a animated and evident procedure that can dramatically change the aesthetics of the bike. A contemporary, custom, or after-market cistern can balm you to practise a motorcycle that is purely your own, and may corner decided mechanical advantages such as fuel faculty and aerodynamics.
Instructions
Removing The Old Tank
1. Turn the fuel petcock to "OFF." This Testament closing fuel from pouring elsewhere when the cistern is disconnected
2. Using pliers, loosen the exiting fuel limit clamp, remove the tube from the petcock and modification it aside.
3.7. Set the tank in place on the motorcycle and install any mounting bolts. If you bought the correct after-market tank for your motorcycle, the mounting points should be the same as the old one.8.
5. Lift the tank up and away from the bike. Hold the tank over a large gas canister and turn the petcock to "RES" to drain the fuel.
Installing The New Tank
6. If necessary, remove the petcock from the old tank with an adjustable wrench and screw it in place on the new tank.
Disconnect the fuel cistern breather tube, normally institute on the lower exactly side of the vat.4. Using your socket locate, remove any bolts that occupancy the vat in levy. In most cases there Testament be one at the rear of the receptacle and one on Everyone side, but every motorcycle is different. Refer to your owner's manual if you are unsure of how your tank is attached.
Reconnect the fuel line to the petcock. Turn the petcock to the "OFF" position until the breather tube is connected.
9. Connect the breather tube to the underside of the tank.
10. Fill your new tank with fuel, turn the petcock to on, and start your motorcycle.
