In the early days of Harley-Davidson, motorcycle batteries did diminutive and than dispense a endowment source for the lights and horn. Reversing the polarity accidentally can cause the battery to blow up or cause damage to the electrical system of your motorcycle. Make sure the connections are tight, and check the connections and terminals often.
1. Choose the licence battery vastness. At variance Harley-Davidson models desire different motorcycle batteries, so know the specifications for your motorcycle. Find out the required cold cranking amps (CCA) of your motorcycle and measure the length, width and height of the cavity to ensure that the battery fits correctly.
2. Turn off the engine before removing the battery.
3. Identify the positive and negative terminals, removing the negative cable of the battery before the positive. This is the perfect time to remove any corrosion that may be present, with a wire brush.
4. Activate your new motorcycle battery. Remove the sealing tube and filling plugs, filling the battery with electrolyte. Let the battery sit for 30 minutes before charging.
5. Fully charge the battery for three to five hours. If the first charge is not done correctly the battery will not perform properly, and may never gain a full charge.
6. Reverse the order when installing the battery, connecting the positive cable first. Matters gain changed, the battery has shift the commodity that determines if or not you can receipts your bike outside for a handle. Like now Harley-Davidson batteries gift many besides of the motorcycle's components, so it is of utmost consequence to certify that the battery is performing at optimum influence. Scrutinize on to memorize interchange a Harley-Davidson battery.