Interchange a Starter on a 2000 Dodge Intrepid
Insert the three starter bolts and tighten them to 40 ft.-lbs. of torque.4. Reinstall the heat shield, the nuts for the catalyst support bracket and mount, and the starter wiring.
Instructions
1. Disconnect the abrogating battery cable and place it aside, forming persuaded that it does not ground itself on metal on the machine. Remove the battery food and the posi-lock connectors from the starter. Remove the nuts on the wire posts located on the starter, then slide the wires off the posts. Lay the nuts back on the starter so you don't lose them.
2. Remove the nuts from the catalyst abutment bracket and the mount using the capture socket. Remove the starter heat shield using the take socket. Using the deserved socket, remove the three starter bolts holding the starter on the transaxle and engine. Slide the starter out of the Intrepid by rotating it toward the engine, then sliding it rearward between the catalyst and the engine mount.
3. Slide the starter into position by sliding it between the catalyst and the engine mount and rotating it away from the engine.Replacing the starter on a 2000 Dodge Intrepid is a quite straightforward undertaking that doesn't want any definite tools. The biggest provocation may be lifting the starter concluded the bantam gap that Dodge provides, as you wil demand to gratuity the starter a decided approach in cast to remove it. You can obtain a latest starter for the Dodge Intrepid at any Car parts store.
Reinstall the posi-lock connectors and the negative battery cable.
