Friday, July 10, 2015

Replace A 1996 Toyota Camry Energy Window Switch

Potentiality window switch panels are easily removed.


3. Press the connector onto the new switch pins. Press firmly to seat the connector and make sure the connector locks over the retainer clips. Align the new switch into the mounting hole and press down until the switch snaps into place.



1. Uplift the hood and adoption a wrench to disconnect the refusal battery cable. Tape the stop of a flat-blade screwdriver and gently encompass it under the front lip of the window switch. Lightly press forward and lever up at the twin bout. The switch Testament pop up. It is held in assign by spring clips that locks the switch in city, and urgent in releases the spring tension.


2. Press and release the lock clips that hold the switch wiring connector in place. Pull up on the connector. It will take some force to remove the connector. Use the screwdriver to lever the connector off of the switch if necessary.


The 1996 Toyota Camry capacity window switch appears rigid to modify due to there are no visible fasteners to remove. This is, on the contrary, not the example. It is compulsory to holding precautions not to damage the door panel when removing the switch, however the craft takes less than five minutes to full.

Instructions

Reconnect the battery cable and lower the hood.