The alternator in a Dodge Intrepid operates many electrical devices in the vehicle while the engine is running. A voltage regulator keeps the voltage equable fixed and is normally object of the alternator meeting. You may commitment to interchange the alternator provided your headlights come dimmer while driving or your battery repeatedly runs down.
Instructions
Disconnect the balky battery cable with a socket wrench and remove the lower plastic splash shield. Withdraw the transmission fluid and disconnect the lower radiator relieve.3. Models fictional from 1993 to 1997 admit a 3.3 L EGA or 3.5 L EGJ engine. Models produced after 1997 are equipped with a 2.7 L EER, 3.2 L or 3.5 L EGJ engine.
2.1. Finish which alternator your Dodge Intrepid Testament extremity. You'll yen to be trustworthy the late alternator is compatible with your Intrepid's engine.
Loosen the "T" bolt, swivel bolt and ride girth adjusting bolt with a socket wrench nevertheless create not remove them. This Testament own you to disconnect the guide band.
4. Loosen the terminal kernel for the alternator so you can remove the B+ wire. Disconnect the order plug for the alternator and remove the pivot bolt, using care not to lose the spacer. Remove the mounting bolts and the alternator assembly.
5. Install the new alternator assembly by reversing the removal procedure. Tighten the terminal nut on the alternator to 89 inch pounds with a torque wrench. Use a belt tension gauge and socket wrench to torque the "T" bolt until the tension on the drive belt is 120 lbs. for a used belt and 180 to 200 lbs. for a new belt.
6. Use a torque wrench to torque the pivot bolt and 10mm mounting bolt to 40 foot pounds. Torque the 8mm mounting bolt to 30 foot pounds.
