Your 2000 washed-up 2001 Acura Integra may be electrifying to propel nevertheless you demand to be able to barricade when the bout comes. Thanks to of this you call for to convert the front CD brakes in your Integra when the continuation is required. This Testament prevent costly and maybe fatal problems at a next interval.
Instructions
1. Arena the Acura Integra on a Apartment lodgings surface.3. Apply silicone grease to the areas that were cleaned to lubricate them. Install the pad retainers into position on the bracket of the caliper. Remove the spin.
2. Fix and lower the caliper bolt. Gripping the caliper, axis it elsewhere from the succession of the rotor. Remove the pads. Remove the shims. Remove the pad retainer springs. Operate automotive engine cleaner and Disinfected the area points where the shim and pads touch the mount and the caliper.
Lay the emergency brake on and accommodation wedges ultimate the wheels to prevent the vehicle from rolling. Disconnect the rejection battery cable. Appropriateness a syringe, turkey baster or homogenous item, to bleed two thirds of the brake fluid from the skillful cylinder. Apply high temperature brake grease to the back side of the pads. Make sure that the excess amount is wiped off. Apply a thin layer of brake grease to both sides of the shim.
4. Install the pads. Install the shims. With the wear indicator facing upward, apply the inner brake pad. Loosen the bleed screw To admit mounting of the caliper over the rotor, push in the caliper piston. Torque the bleed screw, using a torque wrench, to 84-inches lbs.
5. Install the caliper bolts once you have pivoted the caliper back down over the rotor. Using a torque wrench, torque the bolts to 24-ft. lbs. Reinstall the brake pad wear indicator connector. Reinstall the wheels.
6. Reinstall the wheels. Add brake fluid to the master cylinder. Bleed the brakes. Reconnect the negative battery cable to the battery. Start the engine and pump the brakes 3 to 4 times to seat the brake pads. Test drive the Acura Integra at slow to moderate speeds to ensure that the maintenance was performed correctly.
